Top Home Electrical Safety Tips

While it is nearly impossible to prepare against every single potential electrical mishap, it is important to protect against the ones that you can effectively do so with. Below, we will be going over some of the top home electrical safety tips that you will want to utilize in your home.

Top Home Electrical Safety Tips

1. Turn Off Appliances When Not In Use

One of the best things that you can do to protect against these kinds of electrical mishaps is by unplugging large or even medium sized appliances while they are not being used. You want to make it a habit of turning these things off because it will ensure that nothing happens to the socket or your appliances when no one is looking after them.

2. Avoid Overloading Sockets

Another major thing that you are going to want to do is avoid overloading outlets. If you need additional outlets, Bates Electric is a Dayton electrician that offers professional electrical services in Dayton Ohio and have reasonable rates. The total output of everything that you are plugging into the socket should not exceed more than the specified rating of your device.

3. Don’t Use Major Appliances In a Bathroom

Try to avoid using anything electrical in a bathroom where water can accidentally get onto it or splash onto the socket itself. You will want to be sure to check the wiring on any appliance you are using in the bathroom such as a hair dryer, hair straightener, or something else.

4. Don’t Run Wires Under Carpet

While it might be tempting to do so, you are going to want to completely avoid doing this because you will never be able to tell the state of the wire that you are using. It is important to inspect a cable before using it to ensure that there has been no damage to it and that it is not being exposed. By using a wire that is broken or exposed, you will end up risking an electrical fire.

Overall, there is a lot of different things that you are going to be able to do when it comes to minimizing the chances of having to deal with an electrical fire. By focusing on implementing the tips above, you should be able to successfully reduce any possibility of suffering from an electrical fire, and you will be able to protect both your home and your family from having to deal with the repercussions of one.

Common Washer and Dryer Problems

Whenever your washing machine or washer dryer develops some problem, perhaps you may need a repairman to fix it. The following are general tips to help you know that the machine is not in good condition, and then decide whether or not to call a Dayton appliance repair expert.

Machine Is Not Spinning

This problem usually happens when sensors are out of balance because they interpret the size of loads in the washer or dryer. If a small load is construed as a probable risk to the machine, you will realize it is producing too much vibration, which can also lead to damage on the cabinet, drum, and stress on the bearing. However, too much load can cause a spinning problem, and this is indicated by failure to drain properly. Another cause of this problem is worn out carbon brushes, as they slow down the performance of the motor. In case you are not conversant with the machine repair work, contact an appliance maintenance specialist to fix the problem.

Machine Is Not Draining

When you notice there is a lot of water on the computer, it implies drainage is poor. Gravity draining is usually applied to remove the water, but it might be very challenging if there is no built-in emergency drain in the machine. This problem can be solved by the owner simply by pulling the drain-hose and then drain the water into a basin. However, if you think the job is a bit technical, don’t hesitate to call an expert to assist you.

washing machineA Fault Code

When a machine displays an error code, it just indicates there is a problem that should be fixed. A letter/number or flashing lights appear to show the repairman some insight about the problem, but not the exact source or area of the problem. These codes differ from machine to machine, depending on the manufacturer. Therefore, you can search for similar fault code report so that you can identify the cause of the malfunction. However, it is advisable to check everyday things such as water supply and filter before calling an expert.

Machine Is Noisy

The machine may produce a lot of noise if there is something trapped in the drum such as coin or wire. Several models have detachable drum paddles to allow the user remove such things. If the machine does not have removable paddles, the obstacles can be eliminated through the sump hose hole or heater hole. In case the bearings fail, the machine can start producing noise. This can also cause the drum to play up and down with a rumbling sound, indicating that the bearings are faulty.

Machine Door Is Not Opening

Modern machines detect when there is water, and the door will not open to prevent flooding and other safety risks. Once the machine realizes it is safe to open the door, it will do so. However, failure to open the door even when there is no water, it means the machine’s lock door devices are faulty.

The owner can solve the above common problems, but it is recommended to seek assistance from an expert to avoid damaging your appliance.


Common Backyard Fence Options

A fence plays a vital role in every home’s exterior design. The type of backyard fence you choose will offer not only outdoor décor, but also security and privacy within the property. Most homeowners consider fencing their yards for safety and privacy purposes, and therefore the fencing option also influences the value of your house. The standard garden fences include wood, chain link, vinyl, and wrought iron.

Wood Fencing

It is the most common fencing types, which comes in a variety of designs, styles, and heights. Being one of the most attractive fencing options in the market today, it suits different needs of many homeowners due to its size. A typical fence is about 6ft tall, suitable for blocking the view into the backyard from outside. However, there are shorter wooden fences with gaps between the wooden slats. These are usually for keeping pets and other animals within the yard. Due to the relatively bigger intervals between the wood slats, it may not be right for privacy needs. The price depends on the height of the fence. If you choose to buy a taller fence, the more you are likely to pay.

Vinyl Fencing

According to manufacturers, vinyl fencing is said to be five times stronger and four times flexible compared to wood fencing. It is a common alternative to wood because it lasts longer, without peeling or rotting over time. Since it is weather resistant, homeowners have not subjected to regular maintenance apart from routine cleaning. It is cheap to clean because it resists paints, making it easier to remove graffiti and other unnecessary stains. Initial investment might be high compared to a wood fence, but its low maintenance costs and high durability, vinyl fencing becomes a better option that holds up better than the rest of fencing types. It comes in all styles similar to wood fencing, and therefore can be used for privacy and security purposes.

Chain Link Fencing

Chain link fencing is an excellent choice for those that need to keep their pets and children within the backyard. It does not offer much privacy due to the gaps between the chain link wire, and also they are typically short, hence cannot deter unwanted people from accessing the yard. However, homeowners usually add more privacy by growing flowers, vines, or shrubberies on the fence. You can also add more slats to reduce the size of the gaps so that some more privacy is achieved. It is a standard fencing option, which is cheap, durable, and requires little maintenance.

Wrought Iron Fencing

This is a common type used preferably for beautiful designs due to the beautiful styles on top of the fence. They have wide gaps between the metal bars, and therefore offering little privacy. However, growing vines or flowers on the fence can help you add more privacy, as well as giving the fence a funky looking. If you need a more secure wrought iron fence, you can choose one with spikes on top of the spindles to keep unwanted people from accessing your yard. Even though they are beautiful and sturdy, you need to maintain the quality by repainting or sanding after every 2 to 3 years. In most cases, wrought iron fences are custom-made, and they are relatively more expensive compared to other types of fences.

concrete stain

Basics of Concrete Staining

Once you install a concrete deck or patio, it can stay for years before it starts showing signs of aging. If you don’t need to remove the concrete and construct a new one, giving it a new look through staining can be an ideal alternative. To achieve the best results out the staining job, hiring a concrete contractor is a better option. Depending on the size of the task, concrete staining may take a few minutes to hours to get it completed. A reliable contractor has qualified technicians with the right tools to handle the staining job.

Here Are The Basics Of Concrete Staining

Choice of Color

A concrete contractor will use the color chart to let you choose what you want. Most staining is done using opaque colors to hide the cracks and other marks completely. However, the contractor will do a test on a small portion to show you the result. This is essential to avoid unwelcoming outcome after staining the entire deck or patio. In case you are doing the job on your own, it is advisable to make use of the manufacturer’s color chart and instructions.

Surface Preparation

The concrete surface (deck or patio) should be prepared by removing all objects such as furniture. Use a broom and hose to get rid of all loose residues and particles from the concrete. Also, you can scrape the surface to remove the stuck particles to ensure the surface is thoroughly cleaned. Once the cleaning job is done, allow it to dry for about 24 hours before staining.

Apply Stain

A concrete contractor knows all the required tools to start using a stain. In case you are doing it, pour the stain into a paint pan. Use the paintbrush to apply the stain along the perimeter of the concrete deck, ensuring all seams are taken care of. Once the edge is used, apply the stain to the rest of the surface within the perimeter using the pad. You can use seams to divide the area into sections, and then work on every section at a time. Ensure the blending is perfect by comparing every part, providing the results will not have too much different based on the level of stain darkness.

Replace The Furniture

Once you have finished staining the entire concrete, it will be dry to touch after about 4 hours. However, it is advisable to allow the stain to dry completely before replacing the furniture. This is because you can scratch off the stain if a chair is dragged over it. Therefore, allow the stain to dry for 24 hours before placing furniture.

Lastly, staining is usually done during cloudy days so that you can achieve best results. Your contractor will advise on the best time to do it, but still, you can provide shade if the concrete is not too extensive. However, if done in the sun, you will not be able to blend appropriately because the stain will dry faster.

home remodeling

5 Reasons Why You Need to Hire a Professional Home Remodeler

The cost of home remodeling is one of the limiting factors many homeowners consider when choosing a contractor. Everyone wants to save several dollars on any project, but this should not compromise the quality of work at the end. Many people are claiming to be designers, but what you need is a professional residential designer with vast skills and knowledge to ensure every aspect of remodeling is done in the right manner.

Even though some remodeling jobs can be done without a pro, it is advisable to hire an expert to get exactly what you wanted. Whether it is renovating a single room or the entire home, some things will require a professional to handle. To avoid frustrations in the middle of the project, let an experienced remodeler to tackle the job.

Here Are A Few Reasons You Need A professional Designer For Your Home Remodeling Project

1. Saving time

From choosing the structural design, materials, and the best technologies that suit the remodeling project might be time-consuming. A less skilled contractor may spend a lot of time to figure out these aspects, hence leading to delays in project completion. Hiring a professional remodel contractor with this information at hand will save time.

Also, modern homes can be renovated in a manner that effectiveness is achieved. With the new techniques of building tougher and energy efficient walls, the contractor must be knowledgeable about the best technologies and methods. A good contractor also understands the current building codes required for your house. But since these codes are complex texts, an experienced professional is needed to interpret them correctly.

home remodeling2. Professional Expertise

When remodeling your house, it implies you want it to look more appealing than before. Therefore, the job needs to be done by an experienced professional right from designing to the installation of new fixtures. Hiring a contractor with a team of experts can be a great option.

However, a designer is required to examine your needs and then come up with a good plan. The designer will also guide you through the appropriate ways of hiring a general contractor, as well as recommend suitable subcontractors. He or she can also act as the manager of the project, especially in areas where a bit of construction is required.

3. Accuracy

Some of the home remodeling projects are done based on drawings, which need to be interpreted correctly to avoid costly mistakes. In case the drawings are misinterpreted, it may result in uncertainty about how the elements should be combined. A professional designer understands each part of the picture, and he or she will stay on top of the plan until the end of the project.

Hiring an inexperienced contractor that has fewer skills about interpretations of the drawing may lead to poor results. Some homeowners choose to supervise remodeling projects to save money. If you are not familiar with the details of the pictures, the workers might fail to follow the details correctly. Therefore, hiring a reliable professional is recommended for a better outcome.

4. Constant Support

Since most homeowners will need to save money on remodeling projects, sometimes cheaper contractors are not the best. It is not easy to identify a mistake done by a contractor until another expert is involved in verifying the problem. Home remodeling might include more than one contractor, depending on the size of the project.

If the first contractor makes some mistakes, probably it will be identified by the next contractor. Since it ‘s hard to access a former contractor to come and fix the problem, this means you will be forced to pay additional fees to the new contractor to fix those problems. To avoid such costly blunders, it is advisable to hire an experienced contractor, with the right tools and highly qualified workers.

5. Satisfaction

Nothing feels better than getting exactly what you wanted, especially when it comes to the big investment like remodeling the entire house. A professional designer not only adheres to the drawings details but also ensures satisfaction to your needs. Designers keep modern renovation trends at their finger tips, and they can assist you to choose the best design based on your budget.

Reglazing Sinks and Tile Areas

If you do not need to remodel the whole of your bathroom, reglazing can be a better alternative to make the bathroom look brand new. Replacing several fixtures such as bathtub and cabinets can be expensive regarding money, and therefore reglazing can save you thousands of dollars. Bathroom remodeling involves removing the old fixtures and installing new ones, plumbing, and electrical wiring, which might cost you thousands of dollars.

Reglazing Bathroom Sinks

refinished-sinkMany home improvement companies have estimate calculators where customers can enter details including the zip codes and some sinks that need to be glazed. The results give the rough estimate for a primary job under normal working conditions. The estimates are used for initial planning, but not the accurate quotes from a company. Therefore, homeowners can contact professionals to obtain more accurate estimates for refinishing services before striking a deal.

Based on the rough estimates, you will know the cost of materials, as well as the cost of delivering them to your site. Also, the cost of transporting equipment to and from your home is included. There is the cost of preparing the site and cost of protecting the structures that are already in place. The experts include these costs to take full responsibility for ensuring other components and finishes are not interfered with during sink reglazing. The estimates also incorporate clean up costs, as well as debris removal once the project is completed. A few of the bathroom remodeling companies usually charge hourly jobs, and the labor costs will also be included.

Continue reading “Reglazing Sinks and Tile Areas”

All You Need to Know about Plumbing Services – Tips and Tricks

Plumbing can be described as the system of valve assemblies, pipes, drains fitting, and devices that are installed in buildings to remove waterborne wastes, distribute drinking water, as well as heating and washing purposes. It is an experienced trade of working with pipes, plumbing fixtures, and tubing in the systems.

Residential Plumbing Improvements Tips & Tricks

A plumber is an individual who installs and repairs piping systems, plumbing fixtures, water heaters, and backflow preventers. Plumbing experts lay pipe-lines to allow transportation of water and other fluids. Plumbing is also necessary for facilitating transportation of sanitary collection, wastes, and distribution of water within buildings.

Good plumbers should have professional expertise in handling both residential and commercial plumbing systems. They usually begin with checkups and diagnosis by use of pipe inspection cameras, which helps in identifying the source of a problem without interrupting activities within the building. They should also install and upgrade your system, as well as advise on the best fixtures suitable for washrooms.

Various Types of Plumbing Services

• Bathroom and toilet plumbing
• Residential and commercial plumbing
• Shower plumbing services
• Kitchen plumbing services
• Replacement of sewer lines
• Construction plumbing services
• Plumbing leaks and Clogged drains
• Bidet replacement and repair
• LP and Natural gas lines
• Faucet replacement and repair
• Tankless water heaters
• Waste/water/sewer line replacement and gas systems

plumber5 Things to Consider When Choosing a Plumber

1. Check Their License and Insurance Coverage

A plumber is required to have a valid license from a local authority. Therefore, you can check with your local municipality all the requirements that workers should fulfill. A dependable worker will be willing and able to show you all the relevant legal documents, including an insurance policy. Insurance cover caters for any damage or injuries that may occur to workers while operating within your place.

2. Level of Experience

Hiring a highly experienced plumber ensures high-quality work. Choose a plumber who has been working in the industry for quite some time. Also, the expert should be encountered in the work that you need. Plumbing services range from fundamental issues to more sophisticated problems that require high expertise. Therefore, the plumber should be relevant to the work you need.

3. Find References

Trustworthy plumbers provide recommendations to new customers. Before striking any deal, you can call the past clients and ask about their experience with the plumber. Also, you can ask about prices and if they are willing to work with that particular worker again. A reliable plumber has a good track record, with a significant number of happy clients.

4. Schedule Appointments For Estimates

Reliable plumbers should make an appointment of visiting your place to inspect and carry out estimates. This will give you an opportunity to get direct information about the cost, and explain all your job expectations. Onsite assessments allow proper budget planning. If a plumber is not willing to visit your site, find another one.

5. Consider Hiring a Local Expert

Choosing a local plumbing company can be the best idea because maintenance and repair services will be readily available. The plumber will advise on the suitable maintenance plans such as odor control, hydro-scrub drain cleaning, auto-injection systems, and restroom disinfection services. Also, a local plumber will be available and easily accessed whenever there is an emergency.

Bathroom Remodeling – Main Project Phases

Bathroom Remolding could be the best thing that you can do for you home. Imagine this. Starting every morning in your new bathroom with all the amenities you need and love is a wonderful way to start your day. A bathroom is a place where you start your day, and remodeling your bathroom and turning it into a place you love can make your days start off right! There are many things to consider when to want to start your bathroom renovation from budget to finishing touches. Your bathroom is one of the most important rooms in your house so it should be a place that you enjoy being. Bathroom remodeling can also be much easier than people think, you don’t have to do everything at once. Even something as simple as adding a new shower to your bathroom can be a significant upgrade. If you update your bathroom step by step, you run into less major problems that can cost a lot of money and even put your toilet out of order for a while.

Preparing For Your New Bathroom Remodel Project

bath-remodelBefore you start remodeling your bathroom, you need to come up with a budget and a plan. Keep in mind when you come up with the budget for your bathroom to add extra money for things that can and will go wrong. After you decide how much money you want to spend, you can narrow it down to the types of fixtures that you want in your bathroom. Next, think about how you want the bathroom to look. There are many different resources available for bathroom remodeling ideas, and it’s always helpful to look at pictures of bathrooms to get ideas for your project. You may not say no how you want to remodel your bathroom until you see a picture of a perfect one. Because remodeling a full bathroom may be out of you budget, we have put together a list of the top bathroom remodeling ideas. These products will help you get the most out of your bathroom on a small budget.

The first thing to significantly improve your bathroom experience is a new showerhead. They now have multi-jet shower showerheads that will please just about anyone. These showerheads can be very inexpensive, but can make a significant change to the bathroom. Bathroom shower heads tend to get clogged over time, and you will have a feeble stream of water that comes out. There’s nothing more annoying than a weak shower stream, and a new showerhead can fix that problem instantly. Another simple project for a bathroom is to get heated bathroom tiles. There is nothing more comforting to getting out of a hot shower and stepping on heated tiles. Another small bathroom remodeling project is installing steam showers. There are now fixtures that have a steam option, so you can decide if you want to go in for a full shower, or just relax in the steam. No matter what bathroom improvement idea that you agree it’s going to make your bathroom much more enjoyable. For a room that you start every single day in, its worth the money that it may cost to make it that much better.

Specific Upgrade Options


Utilize your bathroom remodeling as an opportunity to get clean, free lines. If you like the granite when you are done, your bathroom remodeling project can remodelled-bathroomprepare you for replacing kitchen countertops later. You may choose a granite vanity top with one of the new vessel sinks.


Relocating a bathroom can require major bathroom remodeling. Updating it, however, is a simpler task, and can also quickly update an old bathroom. When you need to remodel your bath further, attempt to add a bidet. A bathroom upgrade will most likely require a contractor.


Many new remodels fails to get results of its aim because overhead lights are allowed to remain. While moisture resistant can light above tub or shower is a good idea, a ceiling lamp should be swapped out with lights on the walls to set the mood of your new remodel.


If space allows, attempt to add a stand alone shower to the remaining section if there’s enough room to do so.


Is It Time To Update Your Bathroom?

If you think the bathroom is looking tired and worn out, it may be time to make some changes. There are times when painting the walls will make enough of a difference, but if you are considering the overall picture of the bathroom, then chances are pictured is not going to be enough. To get some new bathroom remodeling ideas, take a picture of your bathroom along with a diagram of the floor plan to the local home supply store and compare it to what is currently available.

You should never go to the store with the mindset that you are only going to look at a new sink, because when you see the unit in new cabinets, you will likely change your mind about the project. Be prepared to consider all the changes that you might want to make and look at prices to make sure they are affordable. You can also consider only acting on some of the bathroom remodeling ideas that you can afford, planning on instituting the others at a later date. When considering a staggered plan, work on the bathroom remodeling ideas that will make the biggest improvement in appearance first, but there are something that should be done at the same time. For instance, when replacing an old sink, leaving the old cabinets in place will detract from the appearance.

For many folks, it may be difficult to afford to enact all of their bathroom remodeling ideas at the same time. It is possible to perform all of the remodelings over time, doing the second phase once the first step is paid. However, a definitive plan in the order in which the jobs are done will have to be devised to make sure it can flow together. To accomplish this, the entire project will need to be planned to determine which can be done separately and which ones have to be done jointly.

Flooring is a major undertaking in some bathrooms and if, after the floor is installed the homeowner decides of different cabinets, the flooring may not match as well. When sketching out the bathroom remodeling ideas make sure all of the items that matter will also be available when the next phase begins. It is a frequent problem in home remodeling that items are discontinued and replaced with different designs. This can lead to problems, but leaving some of the plans open to change can still make it possible.