electrician

Top Home Electrical Safety Tips

While it is nearly impossible to prepare against every single potential electrical mishap, it is important to protect against the ones that you can effectively do so with. Below, we will be going over some of the top home electrical safety tips that you will want to utilize in your home.

Top Home Electrical Safety Tips

1. Turn Off Appliances When Not In Use

One of the best things that you can do to protect against these kinds of electrical mishaps is by unplugging large or even medium sized appliances while they are not being used. You want to make it a habit of turning these things off because it will ensure that nothing happens to the socket or your appliances when no one is looking after them.

2. Avoid Overloading Sockets

Another major thing that you are going to want to do is avoid overloading outlets. If you need additional outlets, Bates Electric is a Dayton electrician that offers professional electrical services in Dayton Ohio and have reasonable rates. The total output of everything that you are plugging into the socket should not exceed more than the specified rating of your device.

3. Don’t Use Major Appliances In a Bathroom

Try to avoid using anything electrical in a bathroom where water can accidentally get onto it or splash onto the socket itself. You will want to be sure to check the wiring on any appliance you are using in the bathroom such as a hair dryer, hair straightener, or something else.

4. Don’t Run Wires Under Carpet

While it might be tempting to do so, you are going to want to completely avoid doing this because you will never be able to tell the state of the wire that you are using. It is important to inspect a cable before using it to ensure that there has been no damage to it and that it is not being exposed. By using a wire that is broken or exposed, you will end up risking an electrical fire.

Overall, there is a lot of different things that you are going to be able to do when it comes to minimizing the chances of having to deal with an electrical fire. By focusing on implementing the tips above, you should be able to successfully reduce any possibility of suffering from an electrical fire, and you will be able to protect both your home and your family from having to deal with the repercussions of one.

Common Washer and Dryer Problems

Whenever your washing machine or washer dryer develops some problem, perhaps you may need a repairman to fix it. The following are general tips to help you know that the machine is not in good condition, and then decide whether or not to call a Dayton appliance repair expert.

Machine Is Not Spinning

This problem usually happens when sensors are out of balance because they interpret the size of loads in the washer or dryer. If a small load is construed as a probable risk to the machine, you will realize it is producing too much vibration, which can also lead to damage on the cabinet, drum, and stress on the bearing. However, too much load can cause a spinning problem, and this is indicated by failure to drain properly. Another cause of this problem is worn out carbon brushes, as they slow down the performance of the motor. In case you are not conversant with the machine repair work, contact an appliance maintenance specialist to fix the problem.

Machine Is Not Draining

When you notice there is a lot of water on the computer, it implies drainage is poor. Gravity draining is usually applied to remove the water, but it might be very challenging if there is no built-in emergency drain in the machine. This problem can be solved by the owner simply by pulling the drain-hose and then drain the water into a basin. However, if you think the job is a bit technical, don’t hesitate to call an expert to assist you.

washing machineA Fault Code

When a machine displays an error code, it just indicates there is a problem that should be fixed. A letter/number or flashing lights appear to show the repairman some insight about the problem, but not the exact source or area of the problem. These codes differ from machine to machine, depending on the manufacturer. Therefore, you can search for similar fault code report so that you can identify the cause of the malfunction. However, it is advisable to check everyday things such as water supply and filter before calling an expert.

Machine Is Noisy

The machine may produce a lot of noise if there is something trapped in the drum such as coin or wire. Several models have detachable drum paddles to allow the user remove such things. If the machine does not have removable paddles, the obstacles can be eliminated through the sump hose hole or heater hole. In case the bearings fail, the machine can start producing noise. This can also cause the drum to play up and down with a rumbling sound, indicating that the bearings are faulty.

Machine Door Is Not Opening

Modern machines detect when there is water, and the door will not open to prevent flooding and other safety risks. Once the machine realizes it is safe to open the door, it will do so. However, failure to open the door even when there is no water, it means the machine’s lock door devices are faulty.

The owner can solve the above common problems, but it is recommended to seek assistance from an expert to avoid damaging your appliance.

 

concrete stain

Basics of Concrete Staining

Once you install a concrete deck or patio, it can stay for years before it starts showing signs of aging. If you don’t need to remove the concrete and construct a new one, giving it a new look through staining can be an ideal alternative. To achieve the best results out the staining job, hiring a concrete contractor is a better option. Depending on the size of the task, concrete staining may take a few minutes to hours to get it completed. A reliable contractor has qualified technicians with the right tools to handle the staining job.

Here Are The Basics Of Concrete Staining

Choice of Color

A concrete contractor will use the color chart to let you choose what you want. Most staining is done using opaque colors to hide the cracks and other marks completely. However, the contractor will do a test on a small portion to show you the result. This is essential to avoid unwelcoming outcome after staining the entire deck or patio. In case you are doing the job on your own, it is advisable to make use of the manufacturer’s color chart and instructions.

Surface Preparation

The concrete surface (deck or patio) should be prepared by removing all objects such as furniture. Use a broom and hose to get rid of all loose residues and particles from the concrete. Also, you can scrape the surface to remove the stuck particles to ensure the surface is thoroughly cleaned. Once the cleaning job is done, allow it to dry for about 24 hours before staining.

Apply Stain

A concrete contractor knows all the required tools to start using a stain. In case you are doing it, pour the stain into a paint pan. Use the paintbrush to apply the stain along the perimeter of the concrete deck, ensuring all seams are taken care of. Once the edge is used, apply the stain to the rest of the surface within the perimeter using the pad. You can use seams to divide the area into sections, and then work on every section at a time. Ensure the blending is perfect by comparing every part, providing the results will not have too much different based on the level of stain darkness.

Replace The Furniture

Once you have finished staining the entire concrete, it will be dry to touch after about 4 hours. However, it is advisable to allow the stain to dry completely before replacing the furniture. This is because you can scratch off the stain if a chair is dragged over it. Therefore, allow the stain to dry for 24 hours before placing furniture.

Lastly, staining is usually done during cloudy days so that you can achieve best results. Your contractor will advise on the best time to do it, but still, you can provide shade if the concrete is not too extensive. However, if done in the sun, you will not be able to blend appropriately because the stain will dry faster.

home remodeling

5 Reasons Why You Need to Hire a Professional Home Remodeler

The cost of home remodeling is one of the limiting factors many homeowners consider when choosing a contractor. Everyone wants to save several dollars on any project, but this should not compromise the quality of work at the end. Many people are claiming to be designers, but what you need is a professional residential designer with vast skills and knowledge to ensure every aspect of remodeling is done in the right manner.

Even though some remodeling jobs can be done without a pro, it is advisable to hire an expert to get exactly what you wanted. Whether it is renovating a single room or the entire home, some things will require a professional to handle. To avoid frustrations in the middle of the project, let an experienced remodeler to tackle the job.

Here Are A Few Reasons You Need A professional Designer For Your Home Remodeling Project

1. Saving time

From choosing the structural design, materials, and the best technologies that suit the remodeling project might be time-consuming. A less skilled contractor may spend a lot of time to figure out these aspects, hence leading to delays in project completion. Hiring a professional remodel contractor with this information at hand will save time.

Also, modern homes can be renovated in a manner that effectiveness is achieved. With the new techniques of building tougher and energy efficient walls, the contractor must be knowledgeable about the best technologies and methods. A good contractor also understands the current building codes required for your house. But since these codes are complex texts, an experienced professional is needed to interpret them correctly.

home remodeling2. Professional Expertise

When remodeling your house, it implies you want it to look more appealing than before. Therefore, the job needs to be done by an experienced professional right from designing to the installation of new fixtures. Hiring a contractor with a team of experts can be a great option.

However, a designer is required to examine your needs and then come up with a good plan. The designer will also guide you through the appropriate ways of hiring a general contractor, as well as recommend suitable subcontractors. He or she can also act as the manager of the project, especially in areas where a bit of construction is required.

3. Accuracy

Some of the home remodeling projects are done based on drawings, which need to be interpreted correctly to avoid costly mistakes. In case the drawings are misinterpreted, it may result in uncertainty about how the elements should be combined. A professional designer understands each part of the picture, and he or she will stay on top of the plan until the end of the project.

Hiring an inexperienced contractor that has fewer skills about interpretations of the drawing may lead to poor results. Some homeowners choose to supervise remodeling projects to save money. If you are not familiar with the details of the pictures, the workers might fail to follow the details correctly. Therefore, hiring a reliable professional is recommended for a better outcome.

4. Constant Support

Since most homeowners will need to save money on remodeling projects, sometimes cheaper contractors are not the best. It is not easy to identify a mistake done by a contractor until another expert is involved in verifying the problem. Home remodeling might include more than one contractor, depending on the size of the project.

If the first contractor makes some mistakes, probably it will be identified by the next contractor. Since it ‘s hard to access a former contractor to come and fix the problem, this means you will be forced to pay additional fees to the new contractor to fix those problems. To avoid such costly blunders, it is advisable to hire an experienced contractor, with the right tools and highly qualified workers.

5. Satisfaction

Nothing feels better than getting exactly what you wanted, especially when it comes to the big investment like remodeling the entire house. A professional designer not only adheres to the drawings details but also ensures satisfaction to your needs. Designers keep modern renovation trends at their finger tips, and they can assist you to choose the best design based on your budget.

All You Need to Know about Plumbing Services – Tips and Tricks

Plumbing can be described as the system of valve assemblies, pipes, drains fitting, and devices that are installed in buildings to remove waterborne wastes, distribute drinking water, as well as heating and washing purposes. It is an experienced trade of working with pipes, plumbing fixtures, and tubing in the systems.

Residential Plumbing Improvements Tips & Tricks

A plumber is an individual who installs and repairs piping systems, plumbing fixtures, water heaters, and backflow preventers. Plumbing experts lay pipe-lines to allow transportation of water and other fluids. Plumbing is also necessary for facilitating transportation of sanitary collection, wastes, and distribution of water within buildings.

Good plumbers should have professional expertise in handling both residential and commercial plumbing systems. They usually begin with checkups and diagnosis by use of pipe inspection cameras, which helps in identifying the source of a problem without interrupting activities within the building. They should also install and upgrade your system, as well as advise on the best fixtures suitable for washrooms.

Various Types of Plumbing Services

• Bathroom and toilet plumbing
• Residential and commercial plumbing
• Shower plumbing services
• Kitchen plumbing services
• Replacement of sewer lines
• Construction plumbing services
• Plumbing leaks and Clogged drains
• Bidet replacement and repair
• LP and Natural gas lines
• Faucet replacement and repair
• Tankless water heaters
• Waste/water/sewer line replacement and gas systems

plumber5 Things to Consider When Choosing a Plumber

1. Check Their License and Insurance Coverage

A plumber is required to have a valid license from a local authority. Therefore, you can check with your local municipality all the requirements that workers should fulfill. A dependable worker will be willing and able to show you all the relevant legal documents, including an insurance policy. Insurance cover caters for any damage or injuries that may occur to workers while operating within your place.

2. Level of Experience

Hiring a highly experienced plumber ensures high-quality work. Choose a plumber who has been working in the industry for quite some time. Also, the expert should be encountered in the work that you need. Plumbing services range from fundamental issues to more sophisticated problems that require high expertise. Therefore, the plumber should be relevant to the work you need.

3. Find References

Trustworthy plumbers provide recommendations to new customers. Before striking any deal, you can call the past clients and ask about their experience with the plumber. Also, you can ask about prices and if they are willing to work with that particular worker again. A reliable plumber has a good track record, with a significant number of happy clients.

4. Schedule Appointments For Estimates

Reliable plumbers should make an appointment of visiting your place to inspect and carry out estimates. This will give you an opportunity to get direct information about the cost, and explain all your job expectations. Onsite assessments allow proper budget planning. If a plumber is not willing to visit your site, find another one.

5. Consider Hiring a Local Expert

Choosing a local plumbing company can be the best idea because maintenance and repair services will be readily available. The plumber will advise on the suitable maintenance plans such as odor control, hydro-scrub drain cleaning, auto-injection systems, and restroom disinfection services. Also, a local plumber will be available and easily accessed whenever there is an emergency.